Xerox 8855 用户手册
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide
61
Scanning to the Network (SCAN mode) (continued)
Understanding the READY TO SCAN
screen
screen
Below is an example of the READY TO SCAN screen. Following the
example are descriptions of the special information displayed on the screen.
example are descriptions of the special information displayed on the screen.
This area indicates the selected file format. Refer to SCAN
OPTIONS (LINE) or SCAN OPTIONS (PHOTO) to set
these options. The options available are TIFF/CCITTG4 1
BIT, PDF and CALS1/CCITTG4 1BIT.
OPTIONS (LINE) or SCAN OPTIONS (PHOTO) to set
these options. The options available are TIFF/CCITTG4 1
BIT, PDF and CALS1/CCITTG4 1BIT.
This area shows the selected scanning resolution. Press the
Previous or Next key to select a value of 100, 200, 300, or
400 DPI (Dots Per Inch). A new value can be selected
before each scan.
Previous or Next key to select a value of 100, 200, 300, or
400 DPI (Dots Per Inch). A new value can be selected
before each scan.
This icon shows how much Random Access Memory (RAM)
is in use by the scanned file. As space is used, the dark area
increases. After the scan is complete, the file is processed
and then moved to the internal hard disk. The RAM space
then becomes available again.
is in use by the scanned file. As space is used, the dark area
increases. After the scan is complete, the file is processed
and then moved to the internal hard disk. The RAM space
then becomes available again.
This icon shows how much hard disk space is in use by
stored files. As space is used, the dark area increases.
When files are moved off the disk over the network to remote
devices, the space becomes available again. Files are also
deleted when the age of the file exceeds the value set in the
timer. Refer to "Timers" in the "Main Menu" section to set
this value. The factory default is 24 hours.
stored files. As space is used, the dark area increases.
When files are moved off the disk over the network to remote
devices, the space becomes available again. Files are also
deleted when the age of the file exceeds the value set in the
timer. Refer to "Timers" in the "Main Menu" section to set
this value. The factory default is 24 hours.
400 DPI
READY TO SCAN
INSERT DOCUMENT
INSERT DOCUMENT
400 DPI
TIFF/CCITTG4
1 BIT
TIFF/CCITTG4
1 BIT