Allied Telesis AT-9900 用户手册
186
SNMP MIBs
Release Note
Software Version 2.8.1
C613-10477-00 REV B
C613-10477-00 REV B
SNMP MIBs
This Software Version includes the following enhancements to SNMP MIBs:
■
■
■
■
■
■
■
■
■
This section describes the enhancements. The modified commands to
implement them are described in
implement them are described in
SHDSL Line MIB
RFC 3276, Definitions of Managed Objects for High Bit-Rate DSL - 2nd generation
(HDSL2) and Single-Pair High-Speed Digital Subscriber Line (SHDSL) Lines,
defines a portion of the Management Information Base (MIB) for managing
High Bit-Rate DSL - 2nd generation (HDSL2) and Single-Pair High-Speed
Digital Subscriber Line (SHDSL) interfaces. These interfaces correspond to
entries in the ifTable with an ifType of hdsl2 (168) or shdsl (169), respectively.
(HDSL2) and Single-Pair High-Speed Digital Subscriber Line (SHDSL) Lines,
defines a portion of the Management Information Base (MIB) for managing
High Bit-Rate DSL - 2nd generation (HDSL2) and Single-Pair High-Speed
Digital Subscriber Line (SHDSL) interfaces. These interfaces correspond to
entries in the ifTable with an ifType of hdsl2 (168) or shdsl (169), respectively.
Objects in the MIB represent the SHDSL line from the perspective of:
■
a central site terminal unit (STU-C)
■
a remote site terminal unit (STU-R)
■
a regenerator unit (SRU)
The objects defined in this MIB reside in the mib(1) subtree, under the
Transmission Group defined in MIB-II and have the object identifier is
hdsl2ShdslMIB { transmission 48 }. Objects in the SHDSL MIB are organised
into the following groups:
Transmission Group defined in MIB-II and have the object identifier is
hdsl2ShdslMIB { transmission 48 }. Objects in the SHDSL MIB are organised
into the following groups:
■
The Span Configuration Group contains objects that describe the
configuration of the SHDSL span.
configuration of the SHDSL span.
■
The Span Status Group contains objects that describe the status of the
SHDSL span.
SHDSL span.
■
The Unit Inventory Group contains objects that describe the units in
SHDSL lines. The unit inventory information is retrieved via the EOC.
SHDSL lines. The unit inventory information is retrieved via the EOC.
■
The Segment Endpoint Configuration Group contains objects that describe
the configuration of the SHDSL segment endpoints.
the configuration of the SHDSL segment endpoints.
■
The Segment Endpoint Current Status/Performance Group contains
objects that describe the current status and performance of segment
endpoints.
objects that describe the current status and performance of segment
endpoints.
■
The Segment Endpoint 15-Minute Interval Status/Performance Group
contains objects that describe the historic status and performance
information of segment endpoints in 15-minute intervals.
contains objects that describe the historic status and performance
information of segment endpoints in 15-minute intervals.