Allied Telesis AT-9900 用户手册

SHOW EPSR[={epsr-name|ALL}]

This command displays information about the specified EPSR instance, or all 
EPSR instances on the switch (

).

 

Figure 1-13: Example output from the show epsr command

EPSR

The EPSR instance whose details are displayed.

Default: all

epsr-name

The name of the EPSR instance. This can be a character 
string, 1 to 15 characters long. Valid characters are 
uppercase letters (A-Z), lowercase letters (a-z), digits (0-9), 
the underscore character ("_"), the hyphen character ("-"). 
The epsr-name cannot be ALL.

ALL

All EPSR instances.

EPSR Information

--------------------------------------------

Name .......................... blue   

Mode .......................... Master 

Status ........................ Enabled 

State ......................... Complete 

Control VLAN .................. vlan2 (2) 

Data VLAN(s) ...................vlan100 (100)

                                vlan101 (101)

                                vlan102 (102)

Primary Port .................. 1 

Primary Port Status ........... Forwarding 

Secondary Port ................ 2 

Secondary Port Status ......... Blocked 

Hello Time .................... 1 s 

Failover Time ................. 2 s 

Ring Flap Time ................ 0 

Trap .......................... Enabled 

Name .......................... red 

Mode .......................... Transit 

Status ........................ Enabled

State ......................... Links-Up 

Control VLAN .................. vlan3 (3) 

Data VLAN(s) .................. vlan103 (103) 

First Po  rt .................... 1 

First Port Status ..............Forwarding 

First Port Direction .......... Upstream 

Second Port ................... 2 

Second Port Status ............ Forwarding 

Second Port Direction ......... Downstream 

Trap .......................... Enabled 

Master Node ................... 00-00-cd-11-b1-b4

-----------------------------------------------------------