Huawei MC509 用户手册
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
AT Command Interface Specification
SAR Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
133
13.3.2 Interface Description
This command is used to send an unsolicited report to host when entering/exiting
thermal protecting state according temperature. This command is affected by AT
command ^CURC(if exists).
thermal protecting state according temperature. This command is affected by AT
command ^CURC(if exists).
13.3.3 Parameter Description
<Status>:
Value that indicates whether thermal protection takes effect. The
possible values are defined as below:
0
Indicates that the modem has entered thermal protecting state.
1
Indicates that the modem has exit thermal protecting state.