Motorola SBG940 用户手册
94
SBG940 User Guide
X
Exit
Print
Setting Up a USB Driver in Windows Me
1
Insert the SBG940 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be
inserted and read by the PC before you connect the SBG940 to the PC.
inserted and read by the PC before you connect the SBG940 to the PC.
2
Connect the USB cable as shown in
A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:
3
Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed:
successful, the following window is displayed:
4
If the window above is displayed, click Finish. Otherwise, be sure the SBG940 Installation CD-ROM is
correctly inserted in the CD-ROM drive.
correctly inserted in the CD-ROM drive.
When you finish setting up the USB driver, you can continue with “
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.
the procedure is the same.