Motorola SBG940 用户手册
95
SBG940 User Guide
X
Exit
Print
Setting Up a USB Driver in Windows XP
1
Insert the SBG940 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be
inserted and read by the PC before you connect the SBG940 to the PC.
inserted and read by the PC before you connect the SBG940 to the PC.
2
Connect the USB cable as shown in
A few seconds after you complete the USB connection, the Found New Hardware Wizard window is
displayed:
displayed:
3
Be sure “Install the software automatically” is selected.
4
Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed:
successful, the following window is displayed:
5
Click Finish to complete the installation. Otherwise, be sure the SBG940 Installation CD-ROM is correctly
inserted in the CD-ROM drive.
inserted in the CD-ROM drive.
When you finish setting up the USB driver, you can continue with “
Although your SBG model number may be different than in the images in this guide, the procedure
is the same.
is the same.