Denon AVR-2312CI 用户手册

102

Perform when setting the speakers manually or when changing settings made in Audyssey® Auto Setup.
• If you change the speaker settings after performing Audyssey® Auto Setup, it will not be possible to select 

Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (

).

• “SYSTEM SETUP” can be used without changing the settings. Please set if necessary.

Amp Assign
The signal output from the 
SURR.BACK/AMP ASSIGN 
speaker terminal of this unit 
can be switched to match 
your speaker environment.

NORMAL : Select the “NORMAL” setting to perform 7.2-channel playback 
using the surround back or front height speakers.
ZONE2 : Select the “ZONE2” setting to assign the unit’s built-in power 
amplifier for ZONE2 and output the audio in stereo.
Bi-AMP : Select the “Bi-AMP” setting to connect the front speakers via 
the bi-amp connection.
2CH : When you perform 2-channel playback in the DIRECT or STEREO 
mode, select the “2CH” setting to use the other front speakers for 
playback.
Front B : Select the “Front B” setting to use the second set of front 
speakers for playback. You can switch the front speakers A and B to be 
used for playback in accordance with the 2-channel playback or multi-
channel playback mode. When you select this Front B setting, also 
perform the “Front Speaker Setup” (

F.Height : Select the “F.Height” setting to use the front height speaker 
for playback.

Speaker Config.
Select speaker configuration 
and size (bass reproduction 
capability).

Do not use the outward 
shape of the speaker to 
determine selection of a 
“Large” or “Small” speaker. 
Instead, use the frequencies 
set in “Crossover Freq.” 
(

standard for determining 
bass reproduction capability.

Front : Set the front speaker size.
• Large : Use a large speaker that can adequately play back low 

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for 

low frequencies.

• When “Subwoofer” is set to “No”, “Front” is automatically set to 

“Large”.

• When “Front” is set to “Small”, “Center”, “Surround“, “Surr.Back” and  

“Front Height” can not be set to “Large”.

Center : Set the presence and size of the center speaker.
• Large : Use a large speaker that can adequately play back low 

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for 

low frequencies.

• None : Select when a center speaker is not connected.

 “Large” is not displayed when “Front” is set to “Small”.

Subwoofer : Set the presence of a subwoofer.
• Yes : Use a  subwoofer.
• No : Select when a subwoofer is not connected.

 When “Front” is set to “Small”, “Subwoofer” is automatically set to 

“Yes”.

Surround : Set the presence and size of the surround speakers.
• Large : Use a large speaker that can adequately play back low 

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for 

low frequencies.

• None : Select when the surround speakers are not connected.

• When “Surround” is set to “Large”, “Surr.Back” and “Front Height” 

can be set to “Large”.

• When “Surround” is set to “None”, “Surr.Back” and “Front Height” are 

automatically set to “None”.

vSee overleaf

BD