National Instruments 3.22E+04 用户手册

If the 

 error message appears, you might have an address conflict 

with legacy boards in your system. To solve this problem, change the base 
addresses assigned to your legacy boards and refer to the 

 section later in this appendix.

If the 

 error message appears, you might have 

an IRQ conflict with legacy boards in your system. To solve this problem, 
change the IRQ level assigned to your legacy boards and refer to the next 
section, Resolving Resource Conflicts with Legacy Boards.

Resource conflicts typically occur if your system contains legacy boards 
that use resources that are not reserved properly. If a resource conflict 
exists, write down the resource that caused the conflict and refer to the 
Microsoft Windows Me/9x user’s guide for instructions on how to use the 
Device Manager to reserve I/O and IRQ resources for legacy boards.

If Windows Me/9x did not display the New Hardware Found dialog box, 
it did not detect your hardware. To solve this problem, complete the 
following steps:

1.

Select Start»Settings»Control Panel and double-click on the 
System icon.

2.

Click on the Device Manager tab and click on the View devices by 
type button.

3.

Double-click on the Other Devices icon. Windows Me/9x lists the 
boards it does not recognize under Other Devices.

4.

Double-click on the Multi-function adapters icon, where 
Windows Me/9x lists the parent devices of the PCI ports.