Farallon Communications 612 用户手册

Note: You can use the ISDN Setup utility for both the Netopia ISDN 
Modem Model 411 and 412. The two models suppor t slightly 
different features. The software automatically detects which model 
you are using and only displays features that apply to that model. 
The sections below note the features that are available to only one 
of the two models.

If you filled out the ISDN parameters worksheet in 

, refer 

to it now. 

Note: If you ran the ISDN Assistant software, the Switch Type, DN, 
and SPID will automatically be entered. The instructions below 
describe how to manually fill out all the fields in the Easy Setup 
Window.

To configure the Easy Setup window:

1.

Choose a switch type from the Switch Type pop-up menu.

2.

In the B1 Channel SPID entr y field, enter the SPID associated 
with the primar y director y number (DN). If the cursor is not in 
the B1 Channel SPID entr y field, double-click in the field or 
press the Tab key until the field is selected.

3.

In the B1 Channel DN entr y field, enter the primar y DN. 

4.

Check the box beside the phone por t(s) to which you want to 
route calls from telephone number 1. This option lets you route 
calls to analog devices connected to the analog device por ts. 
For information about call routing, 

 (This option is only 

available for the Netopia ISDN Modem Model 412.) If you do 
not have a secondar y SPID and DN, skip steps 

 through 

5.

In the B2 Channel SPID entr y field, enter the SPID associated 
with the secondar y director y number (DN).

6.

In the B2 Channel DN entr y field, enter the secondar y DN.

7.

Check the box beside the phone por t(s) to which you want to 
route calls from telephone number 2. (This option is only avail-
able for the Netopia ISDN Modem Model 412.)