Farallon Communications 612 用户手册

Note: If you want to change the settings displayed in the 
window to the settings currently defined in the Netopia ISDN 
modem, click the Rever t button. This button is useful if you 
make a mistake entering new settings in the window and want 
to rever t to the old settings.

8.

Check the Enable Auto Answer box to turn on the auto answer 
feature. When Enable Auto Answer is active, the ISDN modem 
automatically answers incoming data calls. You might want to 
use this feature if you have callback set up in your communica-
tions software or you want to receive incoming data calls over 
your Netopia ISDN Modem.

9.

Click the Set Modem button to configure the Netopia ISDN 
Modem with the new settings. Generally, you will only need to 
set the parameters in the Easy Setup window once. 

Note: The changes you make in the Easy Setup window are not 
sent to the ISDN modem until you click the Set Modem button. 
When the settings on the Easy Setup and Advanced windows 
exactly match the ISDN modem’s settings, the Set Modem 
button is disabled. 

If the parameters match those registered at the telephone company 
ISDN switch, the D channel LED lights for a few minutes, flashes for 
several seconds, and then turns off. If the LED continues to flash or 
remains lit, see 

If the D channel LED indicates a proper connection to the ISDN 
switch, you can place your first call. Go to the 

.