Cisco Systems 1105 用户手册
B-23
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Appendix B Command Reference
Privilege Level 15 Commands
/dev/sda8 601M 32M 569M 5% /home
/dev/sda6 1001M 136M 865M 14% /opt
/dev/sda13 9.7G 32M 9.7G 0% /tftpboot
/dev/sda9 601M 32M 569M 5% /tmp
/dev/sda10 591M 212M 350M 38% /usr
/dev/sda5 2.9G 450M 2.5G 15% /var
erase config
To erase the configuration in flash memory and reload the software, use the erase
config command.
config command.
erase config
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
Use this command to erase the configuration in flash memory and reload the
WLSE software.
WLSE software.
When you enter the command, you are prompted for confirmation. Enter yes to
confirm, or press Enter to accept the default response no.
confirm, or press Enter to accept the default response no.
Caution
When you confirm this command, the system configuration is erased and the
system reboots automatically. The system will not operate until you reconfigure
it.
system reboots automatically. The system will not operate until you reconfigure
it.
When the system reboots, you must reconfigure it with the setup program. For
information about using the setup program, refer to the Installation and
Configuration Guide for the Cisco 1105 Wireless LAN Solution Engine.
information about using the setup program, refer to the Installation and
Configuration Guide for the Cisco 1105 Wireless LAN Solution Engine.
Example
This command erases the system configuration:
erase config
This will erase your configuration, return device t
o factory defaults, and reload the device