Cisco Systems 1105 用户手册
B-25
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Appendix B Command Reference
Privilege Level 15 Commands
•
Ethernet 1 port is connected to an internal LAN or VLAN, and is configured
to be accessible via any of the supported protocols by entering the following
command:
to be accessible via any of the supported protocols by entering the following
command:
firewall eth1 private
An on-site user has full access to the WLSE, but an external user can only
access it using a secure connection.
access it using a secure connection.
gethostbyname
Use the gethostbyname command to display the IP address of a known domain
name.
name.
gethostbyname host
Syntax Description
host
Domain name of host.
Example
This command displays the IP address of example.com
gethostbyname example.com
209.165.200.224
hostname
To change the system hostname, use the hostname command.
hostname name
Syntax Description
name
New hostname for the WLSE; the name is case sensitive and
may be from 1 to 22 alphanumeric characters.
may be from 1 to 22 alphanumeric characters.