ZyXEL Communications n/a 用户手册

DSL & IAD CLI Reference Guide

Use these commands to configure VoIP settings on the ZyXEL Device.

Use these commands to configure Real-time Transport Protocol settings on the ZyXEL 
Device. 

This example displays the RTP settings configured on the ZyXEL Device.  

Table 46   RTP Command Summary

voice config rtp index <index>

Selects an RTP (Real-time Transport Protocol) index for 
configuration. 

voice config rtp packetsize <index> g711 

<0:10ms|1:20ms|2:30ms> g729 

<0:10ms|1:20ms|2:30ms> 

Specifies the transmit period of RTP packets for G.711 
and G.729 codecs.

voice config rtp rtcpinterval <index> 

<miliseconds> 

Specifies the RTCP (RTP Control Protocol) interval. This 
is the time interval at which the ZyXEL Device sends 
control packets during calls.

voice config rtp save <index> 

Saves the RTP configuration iin the working buffer to 
non-volatile memory. The working buffer is a volatile 
memory space. The settings in the working buffer are not 
applied to the ZyXEL Device until you execute this 
command.

voice config rtp display <index> 

Displays the saved values for the specified RTP 
configuration. 

voice config rtp dumpCfg 

Displays the configured values in the working buffer for 
the specified configuration.

voice config rtp free 

Clears the working buffer for the specified configuration. 
Any unsaved changes are lost.

ras> voice config rtp display 1

       RTP[1] Display

=============================================

Sort Buffer Size ms :10

RTCP Interval ms :0

G711 voice Packet Length ms :20

G729 voice Packet Length ms :20

ras>