ZyXEL Communications n/a 用户手册
Chapter 20 VoIP Commands
DSL & IAD CLI Reference Guide
133
20.2.1 VoIP Relay to PSTN Command Examples
This example displays the PSTN prefix numbers configured on the ZyXEL Device.
he following table describes the labels in this screen.
20.3 VoIP SIP Account Commands
Use these commands to configure SIP accounts on the ZyXEL Device.
ras> voice config pstn display
index PhoneNumber flags
--------------------------------------------
1 7878 7
2 3434 4
3 0
4 5
5 0
6 0
7 0
8 0
9 0
10 0
Table 49
voice config pstn display
LABEL
DESCRIPTION
index
This is the number of a PSTN prefix number entry.
PhoneNumber
This is the prefix number associated with the entry.
flags
This field displays one of the following entries
•
•
0 - if this index entry has not been configured.
•
7 - if the prefix code is turned on, phone number activated and
configured.
configured.
•
4 - if the prefix code is turned off, phone number not activated or
configured.
configured.
Table 50 SIP Account Command Summary
COMMAND
DESCRIPTION
voice config signal index <index>
Specifies the SIP account you want to configure.
voice config signal active <index>
<0:off|1:on>
Activates (1) or deactivates (0) this SIP account.
voice config signal registertimeout
<index> <seconds>
Sets the SIP registration timeout value for this SIP
account. (default 3600 sec)
account. (default 3600 sec)
voice config signal registerresendtime
<index> <seconds>
Sets the number of seconds the ZyXEL Device waits to
resend a registration request if a previous request failed
or there was no response.
resend a registration request if a previous request failed
or there was no response.
voice config signal sessiontimerActive
<index> <0:off|1:on>
Activates (1) or deactivates (0) a SIP session timer for
this SIP account.
this SIP account.
voice config signal sessiontimeout <index>
<30-3600>
Sets the number of seconds a conversation can last
before the call is automatically disconnected. (default
300 sec)
before the call is automatically disconnected. (default
300 sec)