Tascam CC-222MKIV 用户手册

1 – Introduction

TASCAM CC-222

5 – Recording CDs

Rec mute function

The rec mute function allows instant cut-off of the input

signal, and records four seconds of silence on the disc.
1 While recording is in progress, press the

REC MUTE

key.

2 After about four seconds, the unit enters record

standby mode.

NOTE

This function is only available from the remote control
unit. It is not possible to use this function with the main
unit only.

Copy-protection

The CC-222

IV allows copy-protection to be applied to

the discs produced. Naturally, the copy-protection applies

only to digital-to-digital copies.
There are three settings:

•

FREE (may be freely copied), where no copy-pro-

tection is applied to the recorded disc.

•

1GEN (single-generation copying), where one digital

copy (“child”) can be made from the recorded disc, but

no digital copies (“grandchildren”) can be made from

the child.

•

PROH (copy prohibited) which prevents any digital

copies being made from the recorded disc

1 Press the

key repeatedly until the dis-play

shows

COPY ID>XXXX

, where

XXXX

is the current

setting for copy-protection as shown above.

2 Turn the

MULTI DIAL

or use the

SKIP

keys to change

the copy-protection setting.

NOTE

Copy-protection applies on a “per-track”, not a per-disc
basis. This means that you can apply different copy-
protection levels to different tracks (but you can’t apply
different copy-protection levels to different parts of
the same track). If copy-protection is important to your
work, you may want to check this setting every time you
make a recording, to ensure that you have the protec-
tion level that you want.

Fade-in and fade-out

To provide smooth beginnings and endings to recorded

tracks, the unit provides fade facilities.
Fade-ins are from –∞ (silence) to the set input level (see

“Signal volume” on page 21) and fade-outs go from the

current input volume to silence.
The fade-in and fade-out times can be set indepen-dently

in increments of one second, from 1 second to 24 seconds.

To set the fade times:

1 Press the

key repeatedly until the display

shows

FADE IN >XXs

, where

is the current

fade-in time, in seconds.

2 Turn the

MULTI DIAL

or use the

SKIP

keys to change

the value of the fade-in time.

3 Press the

key again so that the display shows

FADE OUT>XXs

, where

is the current fade-out

time, in seconds.

4 Turn the

MULTI DIAL

or use the

SKIP

keys to change

the value of the fade-out time.

It is possible to set the fade-in time only or the fade-

out time only.

ª To perform a fade-in:

1 With a recordable disc loaded, press the

RECORD

key to enter record standby mode.

2 Start the source material, and press the

FADER

key

on the remote control.

The display shows

FADE IN

for the time specified

in the menu item above.

As the fade progresses, the monitored signal gradually

becomes louder, reflecting the level recorded on disc.

ª To perform a fade-out:

1 While recording, press the

FADER

key. The display

shows

FADE OUT

for the time specified in the

menu above.

As the fade progresses, the monitored signal gradu-

ally becomes quieter, reflecting the level recorded

on disc.

2 When the end of the fade-out time is reached, the

unit goes into record standby mode. Recording can

be restarted with the

FADER

key or the

PLAY

PAUSE

keys.

The

FADER

key can be used and also the fade-in and fade-

out times can be reset to new values while recording is in

progress.