Konica Minolta VIVID 700 用户手册
![Konica Minolta](https://files.manualsbrain.com/attachments/35219ede2c552e8742b3de2ff2e860862a7599e0/common/fit/150/50/c44fe408e3f52ec6eb70851dc1658706f6e810acc0fd6ff6802de7d0c07a/brand_logo.png)
190
Chapter
2
Build
Menu
Menu
9i
910
900
700
300
300
n
Moving the Element(s) by Entering Values
To move the element(s) by specifying how much they must be moved, follow the procedure given below.
Note
If
Build – Move – Elements mode was activated using the shortcut key, the element(s) cannot be moved by this method.
Operating Procedure
The following steps must be carried out in
Build – Move – Elements mode.
1
Click the right mouse button.
The [Build-Move-Elements] dialog box will ap-
pear.
pear.
2
Enter the desired amount of movement
for X, Y and Z.
The amount can be entered for all the axes at
the same time.
the same time.
3
Click the [Apply] button.
The selected element(s) will move according to
the values entered.
the values entered.
• If you change a value(s) and click the [Apply]
button, the element(s) will move again according
to the new value(s).
to the new value(s).
New values will not be added to the previous
values. They are absolute values from the original
position.
position.
4
Click the [OK] button.
The [Build-Move-Points] dialog box will close,
movement of the point(s) will be confirmed,
and the
movement of the point(s) will be confirmed,
and the
Build-Move-Points mode will be
canceled.
• Clicking the [Cancel] button will cancel all the
operations that have been performed since the
dialog box was opened.
dialog box was opened.
Build – Move – Elements