Vidikron VP-6000 用户指南

Screen Maint. (Pixel Protect): Select Screen Maint. (Pixel Protect) from the Option menu 
to configure the image burn-in prevention settings on the PlasmaView. 

• Orbiter: Select Orbiter from the Screen Maint. (Pixel Protect) menu to set the picture 

shift. 

• OFF: Orbiter mode does not function. 

• TYPE 1: The image size is reduced so the entire image remains in the display area while 

orbiting. 

• TYPE 2: The image is enlarged so there are no black bands in the display area while 

orbiting.

• TYPE 3: The image size is unchanged. 

 

• Soften: Select Soften from the PDP Mgmt. menu to reduce edges (color transitions) and 

soften the image. 

• OFF: Turns the SOFTEN function off. 

• 1, 2, 3, 4: Activates the SOFTEN setting. Higher numbers create a “softer” image. 

Auto Setup Mode: The PlasmaView can automatically adjust the position, frequency and 
phase of incoming computer signals for optimum picture quality whenever the display is 
turned on, or when a different input or input signal type is selected. To enable this feature, 
select Auto Setup Mode from the Option menu and set it to ON. 

Under some conditions – such as when the input signal consists of mostly 
dark colors – Auto Setup may not produce the desired results. If this 
occurs, set Auto Setup Mode to OFF and manually adjust the image 
position, frequency and phase; refer to Screen on page 38.