Speco Technologies CS16 用户手册

16-Channel Digital Video Recorder

Remote Control

Buttons

  ID Button
  Camera Buttons
  Sequence Button
  Login/Logout Button
  Arrow Buttons
  Menu Button
  Playback Buttons
  Alarm Button
  Layout Button
  Zoom Button
  PTZ Button
  Enter Button
  Esc Button
  PTZ Control Buttons
  Copy Button
  Play/Stop Button

Figure 4 — Infrared remote control.

NOTE: For simplicity, the button descriptions in this manual refer to the front panel buttons.

ID Button

If a DVR System ID is set to 0, the infrared remote control will control that DVR without any additional operations.
(Refer to the System Information setup screen in this chapter for further information on setting the System ID.) If the
system ID is 1 to 16, you must to press the

button and then press the number button (1 to 16 (+10 & 6)) in order to

control that DVR. If the System ID of two or more DVRs is set to 0, those DVRs will react to the infrared remote control
at the same time.

Camera Buttons

Pressing the individual camera buttons will cause the selected camera to display full screen. Buttons 1 to 9 are also
used to enter passwords.

Sequence Button

When in the Live Monitoring mode, pressing the

SEQUENCE

button displays live channels sequentially.

Login/Logout Button

Pressing the

button displays the Login or Logout screen.