Speco Technologies CS16 用户手册

16-Channel Digital Video Recorder

Chapter 3 — Configuration

NOTE: Your DVR should be completely installed before proceeding. Refer to Chapter 2 — Installation.

Front Panel Controls

Figure 3 — DVR front panel.

Menu Button

Copy Button

Esc Button

Play/Stop Button

Camera Buttons

Arrow Buttons

Play/Pause Button

HDD LED

Power LED

USB Port

The front panel looks and operates much like a VCR combined with a multiplexer. The following describes each button
and control. Take a few minutes to review the descriptions. You will use these to initially set up your DVR and for
daily operations.

NOTE: A separate Alarm button on the front panel is not provided. Pressing any button on the front panel resets

alarm output including the internal buzzer when the alarm is activated. However, when you are in the
menu or PTZ mode, you have to exit the menu or PTZ mode first to reset alarm output.

The infrared sensor on the DVR is just to the right of the USB ports. Make certain that nothing blocks
the sensor, or the remote control will not function properly.

When you use wireless communication devices (such as Wi-Fi or Bluetooth) near the DVR, the remote
control might not function properly.

You can also use a USB mouse (not supplied) to navigate through the screens and menus much like
you would on a computer.

Menu Button

In the Live Monitoring mode and Search mode, pressing the

button displays the menu icons at the top of the screen.

Copy Button

Pressing the

COPY

button allows you to copy video clips.

Esc Button

During menu setup, pressing the

ESC

button closes the current menu or setup dialog box.