Speco Technologies CS16 用户手册
Operation Instruction
26
Highlight the Actions 1 and Actions 2 tabs, and the Actions 1 and Actions 2 setup screens appear.
You can set the actions the DVR will take whenever it senses
an input on one of its alarm input connectors.
an input on one of its alarm input connectors.
Highlight the desired box under the Record heading, and press
the button. A list of cameras appears. Select the cameras
that you want the DVR to record whenever it detects an input
on the associated alarm input.
the button. A list of cameras appears. Select the cameras
that you want the DVR to record whenever it detects an input
on the associated alarm input.
NOTE: For the Record action, the camera you select should
be set to the Event or Time & Event recording mode
in the Record Schedule setup screen.
in the Record Schedule setup screen.
Figure 28 — Alarm-In Actions 1 screen.
Highlight the desired box under the Alarm-Out heading, and press the button. A list of Alarm Outputs and Beep
appear. Select the Alarm Output connectors that you would like to activate whenever the DVR detects an input on the
associated alarm input. You can also set the DVR’s internal buzzer to sound.
associated alarm input. You can also set the DVR’s internal buzzer to sound.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the
Alarm-Out setup screen (Schedule tab).
Highlight the desired box under the Notify heading, and press the button. The Alarm-In Notify menu appears.
You can toggle the entire list On and Off by highlighting Notification and pressing the
button. You can toggle the individual items On and Off by highlighting that item
and pressing the button. Highlight OK and press the button to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled in the
Notification setup screen and the DVR should be registered in the Speco
Central (Remote Administration System).
Central (Remote Administration System).
Highlight the desired box under the PTZ heading, and press
the button. A list of PTZ presets appear. Select the preset
the button. A list of PTZ presets appear. Select the preset
position for each PTZ camera, where you want PTZ cameras
to move to whenever the DVR detects an input on the
associated alarm input.
to move to whenever the DVR detects an input on the
associated alarm input.
Highlight the desired box under the Digital Deterrent heading,
and press the button to toggle between On and Off. When
and press the button to toggle between On and Off. When
set to On, the DVR will sound whenever it detects an input
on the associated alarm input.
on the associated alarm input.
Figure 29 — Alarm-In Actions 2 screen.
Motion Detection
Highlight Motion Detection in the Event menu and press the button. The Motion Detection setup screen appears.