Speco Technologies CS16 用户手册

Operation Instruction

Active Cameo Mode

You can enter the Active Cameo mode by selecting   (Display)  Edit Group in the Live Monitoring menu in any
multi-view format. The yellow outline surrounding the video indicates the active cameo, and pressing the arrow buttons
moves the active cameo.  Selecting   (Display)  Edit Group again in any multi-view format, or pressing the
(Play/Pause) button exits the Active Cameo mode.  Selecting Exit Group Edit in the cameo menu displayed when
pressing the

button also exits the Active Cameo mode. The active cameo mode will remains in effect for 15

seconds if there is no further operation.

In active cameo mode, press the button for the camera you want to display in the active cameo. After setting the camera
number to active cameo, the DVR moves the active cameo to the next cameo. When the camera number exists on the
current screen, the active cameo is changed with the existing camera number. When the camera number does not exist
on the current screen, the active cameo is replaced by the camera number. You can change the screen layout in this way.

Zoom Mode

You can enlarge an area of the video by selecting   (Camera Menu)  Zoom in the Live Monitoring menu. For a
few seconds after   (Camera Menu)  Zoom, a rectangle displays on the screen.  A rectangle shows the area that
will be enlarged.  You can move the rectangle around using the arrow buttons.  Pressing the   (Play/Pause) button in
the Zoom mode enlarges the area in rectangle.  Exit the Zoom mode by selecting the

(Exit) icon in the Zoom menu

displayed when pressing the

button. While in the Zoom mode, the icon displays if Zoom is selected in the

Display setup screen (OSD tab).

PTZ Mode

If a user who has PTZ Control authority logs into the system, the user can control PTZ cameras. The DVR will control
cameras with Pan, Tilt and Zoom capabilities. Select (Camera Menu)  PTZ in the Live Monitoring menu to display
the PTZ camera menu and enter the PTZ mode. Selecting the (Exit) icon in the PTZ menu displayed when pressing
the

button exits the PTZ mode.

Select the PTZ camera you wish to control by selecting it from the menu. The icon

displays on the PTZ camera

screen.

To use the remote control buttons, press the Left and Right arrow buttons to pan left and right.
Press the Up and Down arrow buttons to tilt the camera up and down. Press the

ZOOM +

button

to zoom in, and press the

ZOOM –

button to zoom out. You can use the

FOCUS

and

FOCUS

buttons to focus the image.

You can establish preset positions for PTZ cameras. Press the

PRESET SET

button to establish

Presets.

You can quickly move PTZ cameras to Preset positions. Press the

PRESET SELECT

button to

view an established camera Preset position.

Figure 66 — PTZ Select Camera menu.