Speco Technologies CS16 用户手册

Operation Instruction 

 

54 

 
 

 
If a camera is set up as Covert 1 in the Camera setup screen (Settings tab), that camera will not be displayed unless a 
user with Covert Camera View authority logs into the system.  However the camera title and status icons will be 
displayed on the monitor. 

 

If a camera is set up as Covert 2 in the Camera setup screen (Settings tab), that camera appears to be Off unless a user 
with Covert Camera View authority logs into the system.  The camera title will be grayed out and status icons will 
not be displayed on the monitor. 

 

NOTE:  When a camera is set up as Covert 1, the DVR displays the camera title and status icons on the covert 

video.  When set up as Covert 2, the DVR displays only the camera title on the covert video. 

 

If a user who has Covert Camera View authority logs into the system, the user can view video from cameras set to 
Covert 1 or Covert 2 including the camera titles and status icons. 
 
 

Recording Video 

 
Once you have installed the DVR following the instructions in Chapter 2 — Installation, it is ready to record.  The DVR 
will start recording based on the settings you made in the Record setup screen.  See Chapter3 — Configuration. 
 
Recycle On or Recycle Off.  The factory default is Recycle On.  It does this by recording over the oldest video once 
the hard disk is full.  Setting the DVR to Recycle Off causes it to stop recording once the hard disk is full. 
 
Standard (CIF), High (Half D1) or Very High (D1).  The factory default resolution is Standard.  When set to Standard, 
the DVR has a maximum recording speed of 480 ips.  When set to High, the DVR has a maximum recording speed of 
240 ips.  When set to Very High, the DVR has a maximum recording speed of 120 ips. 
 
Although you will be able to record without changing the unit from its original factory settings, you will want to take 
advantages of the DVR’s many tools.  See Chapter 3 — Configuration for detailed descriptions of the recording mode 
options. 
 

 
Selecting   (Panic) in the Live Monitoring menu starts panic recording of all cameras, and selecting   again stops 
panic recording.  If you set the Panic Recording Duration in the Panic Record setup screen, panic recording will stop 
automatically according to the preset duration as long as   is not selected. 

 

will not operate. 

 
 

Recording Audio 

 
If the DVR was set up to record audio, it will record audio from up to four inputs when video is recording. 
 

NOTE:  Make certain you comply with all local and federal laws and regulations when recording audio. 

 
 

Playing Recorded Video 

 
If a user who has Search authority logs into the system, the user can view recorded image.  Once video has been recorded, 
you can view it by pressing the 

PLAY/STOP

 button. 

 
The DVR supports the Triplex function: monitoring, recording and playing back at the same time.  Pressing the 

PLAY/STOP

 

button when in one of the multi-view formats enters the Triplex mode and displays the Select Playback Camera menu.