Sanyo DSR-3506P 用户手册

English

1

Whenever the power is turned on, the operation display 
area will be shown at the top of the monitor screen. This 
area indicates the date, time, picture quality, and other 
information needed for operation.

(1) Date display (JP.14)

“01-01-04” (day-month-year) is displayed when you 
turn the power on for the first time. Be sure to specify 
the correct date using menu settings. 

(2) Time display (JP.14)

“00:00:00” is displayed when you turn the power on for 
the first time. The digital video recorder uses the date 
and time to manage recording and playback points. 
Accordingly, if the time has not been set correctly, you 
will not be able to effectively search for video data. 
Make sure to specify the time using menu settings. 
Recording will not be possible until a setting has been 
made.

Displays the current operation (such as recording or 
playback).

z

During simultaneous recording and playback, the 

display indicates playback ( ).

(4) Remaining memory in recording area (JP.59)

Displays the remaining area memory as a percentage 
when overwriting in the normal recording area or the 
alarm recording area is forbidden. If overwriting has 
been permitted, “REPEAT” is displayed.

(5) Picture quality display (JP.62,68)

Displays the quality of the video that can be recorded 
on the hard disk. Set to “EN” (Enhanced) by default.

“A” is displayed when audio is being recorded or 
played back.

(7) Alarm display and alarm count display (JP.68)

When you set an alarm using the “ALARM REC 
MODE SET” menu item, the alarm display area 
presents the following information.
z

When alarm recording is set;
“ALARM” is displayed.
“ALARM” is flashed during alarm recording.

z

When pre-alarm recording is set;
“PRE” is displayed.
When an alarm occurs, “PRE” disappears, 
“ALARM” is displayed, and the number of alarms is 
shown. The total number is indicated in the alarm 
display.

z

When performing playback from the archive 
area;
“ARCHIV” is displayed.

z

When an external alarm signal is activated;
“EA” is flashed to the left of the camera number.

z

When an motion sensor alarm signal is 
activated;
“SA” is flashed to the left of the camera number.

The title of the playback or monitoring camera is 
displayed.

z

Although operations such as playback, copying, and 
data transfer are possible while recording, this unit 
gives priority to recording, and other operations may be 
delayed as a result.

REC: Recording

: Fast-forward playback

EXT: External timer recording

: Fast-rewind playback

: Playback

: Slow playback

: Reverse playback

: Reverse slow playback

: Still

0

(1)

(2)

(3)

(4)

(5) (6) (7)

(8)

BA

Basic

NO

Normal

EN

Enhanced

FI

Fine

SF

Super Fine

e00_l8hbe_xe_7.book  Page 12  Tuesday, April 27, 2004  10:35 AM