Sanyo DSR-3506P 用户手册

VIEWING VIDEO FROM A CAMERA

English

Press the [MULTI] button.

The MULTI indicator lights up and the monitor display is
divided in six.

In the case of both quad and multi 6 screen display, you
can change the positions in which video from the
various cameras are displayed. (JP.87)

Use the following procedure when viewing a full screen to
have the displayed video change automatically based on
camera numbers.

Press the [SEQUENCE] button.

The SEQUENCE indicator starts to flash and the displayed
video changes automatically based on camera numbers.

It is possible to specify the cameras for which automatic
selection is to be carried out. (JP.89)

Either press the [SEQUENCE] button
once again or press the appropriate
[CAMERA SELECT], [QUAD], or [MULTI]
button.

Automatic selection ends and the display returns to the
normal screen.

Press the [QUAD] button.

The QUAD indicator lights up and the monitor display is
divided in four.

Press the [SEQUENCE] button.

The content of the split screen will automatically toggle
between video from cameras No. 1 through No. 4 and
video from cameras No. 5, No. 6, No. 1, and No. 2.

Press the [SEQUENCE] button once
again.

Automatic selection ends and normal quad-screen display
returns.

Automatic selection cannot be used with playback
video.

Viewing on multi 6 screens

Viewing with automatic screen
selection

Setting automatic full screen selection

Canceling automatic selection

MULTI

02-01-01 00:00:00 REC REPEATENA ALARM 0000

01-01-01 00:00:00 REC REPEATENA ALARM 0000

04-01-01 00:00:00 REC REPEATENA ALARM 0000

01-01-04 00:00:00 REC REPEAT EN A ALARM 0000

Setting automatic quad-screen selection

Returning to normal quad-screen display

QUAD

e00_l8hbe_xe_7.book Page 17 Tuesday, April 27, 2004 10:35 AM