Sanyo DSR-3506P 用户手册
22
English
OPE
RATIO
N
4
PLAYBACK
Use the procedures following procedure to play video stored in the normal recording area (during normal or timer recording).
1
Press the [PLAY/STOP] button.
The PLAY/STOP indicator lights up, and “ ” appears in
the operation display area. Video stored in the normal
recording area is played back. Use the appropriate
[CAMERA SELECT] button to select the camera whose
video is to be played.
the operation display area. Video stored in the normal
recording area is played back. Use the appropriate
[CAMERA SELECT] button to select the camera whose
video is to be played.
z
Video playback begins at the start point of recording.
z
If the start point of recording has been cleared or reset,
video playback will start from the earliest recording.
video playback will start from the earliest recording.
z
When playback ends, the digital video recorder pauses
automatically.
automatically.
z
The operation display area indicates that playback is
paused (using “ ”), and the STILL indicator lights.
paused (using “ ”), and the STILL indicator lights.
z
After being paused or stopped, playback resumes from
the stop point.
the stop point.
2
Press the [PLAY/STOP] button.
Playback ends.
Playing video near the point of recording
The digital video recorder prioritizes recording operations,
and as a result, video playback may pause temporarily.
and as a result, video playback may pause temporarily.
1
Turn the shuttle dial clockwise or counter-
clockwise during video playback.
clockwise during video playback.
When turned clockwise, the symbol “ ” appears in the
operation display area and fast-forward playback is
started.
When turned counter-clockwise, the symbol “ ” appears
in the operation display area and fast-rewind playback is
started.
Normal playback is resumed when you release the shuttle
dial.
operation display area and fast-forward playback is
started.
When turned counter-clockwise, the symbol “ ” appears
in the operation display area and fast-rewind playback is
started.
Normal playback is resumed when you release the shuttle
dial.
z
If the [SHUTTLE HOLD] button is pressed while the
shuttle dial is being turned and either “ ” or “ ” is
displayed, the speed of fast-rewind or fast-forward
playback will be maintained even after the dial is
released.
shuttle dial is being turned and either “ ” or “ ” is
displayed, the speed of fast-rewind or fast-forward
playback will be maintained even after the dial is
released.
(1) Performing fast-forward.
When the jog dial is turned clockwise,
fast-forward playback is started and the
symbol “ ” appears in the operation
display area.
fast-forward playback is started and the
symbol “ ” appears in the operation
display area.
(2) Performing slow playback.
When the jog dial is turned counter-
clockwise, slow playback is started and
the symbol “
clockwise, slow playback is started and
the symbol “
” appears in the
operation display area.
[PLAY/STOP] button
Shuttle dial
Jog dial
[SHUTTLE HOLD] button
POWER indicator
Normal
recording area
Playing video on a full screen
Ending playback
02
01-01-04 00:00:00
EN A ALARM 0000
Operation
display area
PLAY/STOP
PLAY/STOP
Fast-forward and fast-rewind
playback
playback
Changing the playback speed
Starting fast-forward or slow playback
e00_l8hbe_xe_7.book Page 22 Tuesday, April 27, 2004 10:35 AM