Sanyo DSR-3506P 用户手册

下载
页码 112
RECORD SET
3
English
55
7
Turn the shuttle dial clockwise.
“OFF” flashes.
8
To activate timer operation, turn the jog 
dial to select “ON”, and then turn the 
shuttle dial clockwise.
The cursor moves to “START”.
The following settings are carried out using the shuttle 
dial and jog dial.
z
Vertical cursor movement: Turn the jog dial.
z
Cursor movement to the right: Turn the shuttle dial 
clockwise.
z
Modification of values: Turn the shuttle dial clockwise, 
and then with the setting value flashing, turn the jog 
dial.
z
Confirmation of values: Turn the shuttle dial clockwise.
If timer recording has been set to “ON”, the timer’s 
“START” and “STOP” should now be set.
9
Set “PICTURE QUALITY”.
[Settings] (‹ indicates the default setting)
10
Set “AUDIO RECORDING”.
(Example: ON)
[Settings] (‹ indicates the default setting)
z
Audio recording can only be specified when the 
recording rate is 1.00 FPS or greater.
z
When set to “ON”, the letter “A (indicating that audio will 
be recorded)” is displayed in front of recording rate. As 
both video and audio will be stored in the normal 
recording area, this area’s overall capacity will reduce 
accordingly.
11
Turn the shuttle dial counter-clockwise.
<WARNING> screen is displayed.
12
Turn the jog dial to select “YES”, and 
then turn the shuttle dial clockwise.
The display returns to the <EASY SETUP> screen.
Setting
Description
BASIC (BA)
15 kB
NORMAL (NO)
22 kB
‹
ENHANCED(EN)
30 kB
FINE (FI)
42 kB
SUPER FINE (SF)
50 kB
Setting
Description
‹
OFF
Audio recording is not carried out.
ON
Audio recording is carried out.
e00_l8hbe_xe_7.book  Page 55  Tuesday, April 27, 2004  10:35 AM