Sanyo DSR-3506P 用户手册
RECORD SET
3
English
57
The following settings are carried out using the shuttle
dial and jog dial.
z
dial and jog dial.
z
Vertical cursor movement: Turn the jog dial.
z
Cursor movement to the right: Turn the shuttle dial
clockwise.
clockwise.
z
Modification of values: Turn the shuttle dial clockwise,
and then with the setting value flashing, turn the jog
dial.
and then with the setting value flashing, turn the jog
dial.
z
Confirmation of values: Turn the shuttle dial clockwise.
9
Set “PICTURE QUALITY”.
See
P.55
10
Set “AUDIO RECORDING”.
See
P.55
11
Turn the shuttle dial counter-clockwise.
<WARNING> screen is displayed.
12
Turn the jog dial to select “YES”, and
then turn the shuttle dial clockwise.
then turn the shuttle dial clockwise.
The display returns to the <EASY SETUP> screen.
13
Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
the normal screen.
z
The recording rate is automatically calculated based on
recording settings and the number of connected
cameras, and this is indicated by “RECORDING
DURATION”. If a valid figure cannot be calculated,
“ERROR!” will be displayed.
recording settings and the number of connected
cameras, and this is indicated by “RECORDING
DURATION”. If a valid figure cannot be calculated,
“ERROR!” will be displayed.
z
When simple recording settings and individual settings
are both set, the most recent settings override previous
settings.
are both set, the most recent settings override previous
settings.
z
Easy setup settings cannot be used with program
recording or day-specific timer recording.
recording or day-specific timer recording.
Use the following procedures to confirm the hard disk’s
total recording capacity and also the allocation for each
recording area.
total recording capacity and also the allocation for each
recording area.
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
displayed.
2
Turn the jog dial to select “2.RECORD
SET”, and then turn the shuttle dial
clockwise.
SET”, and then turn the shuttle dial
clockwise.
The <RECORD SET> screen is displayed.
3
Turn the jog dial to select “2.
RECORDING AREA SET”, and then turn
the shuttle dial clockwise.
RECORDING AREA SET”, and then turn
the shuttle dial clockwise.
The <RECORDING AREA SET> screen is displayed.
EXIT
Displaying the recording areas
(1)
Displays the total capacity
of the hard disk.
of the hard disk.
(2)
Sets the capacity of the
normal recording area.
normal recording area.
(3)
Sets the capacity of the
alarm recording area.
alarm recording area.
(4)
Sets the capacity of the
archive area.
archive area.
MENU
(1)
(2)
(3)
(2)
(3)
(4)
Normal
recording
area
Alarm
recording
area
Archive area
e00_l8hbe_xe_7.book Page 57 Tuesday, April 27, 2004 10:35 AM