Sanyo DSR-3506P 用户手册
RECORD SET
3
English
67
2
Make settings in the “WEEK” and
“START” columns.
“START” columns.
(1) Turn the jog dial to change “SAT” to “MON”, and then
turn the shuttle dial clockwise.
“--” (time) under “START” flashes.
“--” (time) under “START” flashes.
(2) Turn the jog dial to change “--” to “10”, and then turn
the shuttle dial clockwise.
(3) Turn the jog dial to change “--” to “30”, and then turn
the shuttle dial clockwise.
3
Turn the jog dial to change the stop time
from “--” to “**”, and then turn the
shuttle dial clockwise.
from “--” to “**”, and then turn the
shuttle dial clockwise.
The “DLY” item on line 8 automatically changes to “TUE”
(i.e., the day after that set on line 7) and flashes. Items that
do not need to be set are displayed as
(i.e., the day after that set on line 7) and flashes. Items that
do not need to be set are displayed as
.
4
Set the day and time to stop recording
using “WEEK” and “STOP”, and also
make settings for “FPS” and “SET”.
using “WEEK” and “STOP”, and also
make settings for “FPS” and “SET”.
(1) Turn the jog dial to change “TUE” to “WED”, and then
turn the shuttle dial clockwise.
(2) Turn the jog dial to change “--” to “20”, and then turn
the shuttle dial clockwise.
(3) Turn the jog dial to change “--” to “30”, and then turn
the shuttle dial clockwise.
(4) Turn the jog dial to change “--” (recording rate) to “5”,
and then turn the shuttle dial clockwise.
(5) Turn the jog dial to set “OFF” to “ON”.
5
Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
the normal screen.
Use the following procedure to control the start and end of
recording in response to signals received via the EXT
TIMER ON terminal on the rear of the digital video
recorder.
recording in response to signals received via the EXT
TIMER ON terminal on the rear of the digital video
recorder.
Example:
Recording at a rate of 5 FPS using the EXT TIMER ON
terminal
Recording at a rate of 5 FPS using the EXT TIMER ON
terminal
1
Connect the signal line from the
external timer to the EXT TIMER ON
terminal within the rear panel control
terminal block.
external timer to the EXT TIMER ON
terminal within the rear panel control
terminal block.
2
Turn the jog dial to select line 9 (EXT),
and then turn the shuttle dial clockwise.
and then turn the shuttle dial clockwise.
“OFF” for “PROGRAM” flashes.
3
Turn the jog dial to set “PROGRAM” to
“OFF”, and then turn the shuttle dial
clockwise.
“OFF”, and then turn the shuttle dial
clockwise.
“15” for “FPS” flashes.
4
Turn the jog dial to set “FPS” to “5”,
and then turn the shuttle dial clockwise.
and then turn the shuttle dial clockwise.
“OFF” flashes.
MON --:-- --:-- OFF 15FPS OFF
MON 10:30 --:-- OFF 15FPS OFF
MON 10:30 **:** *** ****FPS ***
TUE **:** --:-- OFF 15FPS OFF
MON 10:30 **:** *** ****FPS ***
TUE **:** 20:30 OFF 5FPS ON
(1)
(2) (3)
(4)
(5)
EXIT
Timer recording using an external timer
External timer signal
External timer input (with a pulse
width of 1 second or more)
EXT ***** ***** OFF 15FPS OFF
EXT ***** ***** OFF 5FPS OFF
e00_l8hbe_xe_7.book Page 67 Tuesday, April 27, 2004 10:35 AM