Sanyo DSR-3506P 用户手册
RECORD SET
3
68
English
SETTINGS
5
Turn the jog dial to change “OFF” to
“ON”, and then turn the shuttle dial
clockwise.
“ON”, and then turn the shuttle dial
clockwise.
The cursor moves to line 1.
6
Press the [EXIT] button.
The setting is completed and turns to normal screen.
7
Press the [TIMER] button.
z
The [TIMER] button lights up and the recorder enters
timer recording standby mode.
timer recording standby mode.
z
“REC” will be displayed within the operation display
area while a signal is being received (with a pulse width
of 1 second or more) via the EXT TIMER ON terminal,
and monitoring video will be recorded in the normal
recording area.
area while a signal is being received (with a pulse width
of 1 second or more) via the EXT TIMER ON terminal,
and monitoring video will be recorded in the normal
recording area.
z
External timer recording and normal timer recording can
be combined.
be combined.
z
Connect the signal line from the external timer to the
external timer recording terminal. External timer
recording will not be possible until a timer is connected.
external timer recording terminal. External timer
recording will not be possible until a timer is connected.
Use the following procedure to select the recording picture
quality, audio recording, and recording rate for the alarm
recording area.
quality, audio recording, and recording rate for the alarm
recording area.
1
Press the [MENU] button and turn the
jog dial to select “2. RECORD SET”, and
then turn the shuttle dial clockwise.
jog dial to select “2. RECORD SET”, and
then turn the shuttle dial clockwise.
The <RECORD SET> screen is displayed.
2
Turn the jog dial to select “7. ALARM
REC MODE SET”, and then turn the
shuttle dial clockwise.
REC MODE SET”, and then turn the
shuttle dial clockwise.
The <ALARM REC MODE SET> screen is displayed.
3
Turn the shuttle dial clockwise.
“OFF” flashes.
4
Turn the jog dial to select “ALARM
RECORDING”, and then turn the shuttle
dial clockwise.
RECORDING”, and then turn the shuttle
dial clockwise.
[Settings] ( indicates the default setting)
“OLY AL-RC ON TMR” can be validated simply by making
a timer setting. Accordingly, there is no need to press the
[TIMER] button.
a timer setting. Accordingly, there is no need to press the
[TIMER] button.
The following settings are carried out using the shuttle
dial and jog dial.
z
dial and jog dial.
z
Vertical cursor movement: Turn the jog dial.
z
Cursor movement to the right: Turn the shuttle dial
clockwise.
clockwise.
z
Modification of values: Turn the shuttle dial clockwise,
and then with the setting value flashing, turn the jog dial.
and then with the setting value flashing, turn the jog dial.
z
Confirmation of values: Turn the shuttle dial clockwise.
Setting alarm recording
To set alarm recording
EXT ***** ***** OFF 5FPS ON
EXIT
TIMER
MENU
Setting
Description
OFF
Alarm recording is not carried out.
ENABLED
Alarm recording is always carried out,
regardless of whether or not timer recording
is being performed.
regardless of whether or not timer recording
is being performed.
AL-REC ON
TIMER
TIMER
Alarm recording is carried out only during
timer recording.
timer recording.
AL-REC OFF
TIMER
TIMER
Alarm recording is carried out only when
timer recording is not being performed.
timer recording is not being performed.
OLY AL-RC
ON TMR
ON TMR
Alarm recording is carried out only for the
amount of time set by the timer. Normal
recording is not performed.
amount of time set by the timer. Normal
recording is not performed.
The cursor moves to
“ALARM
RECORDING”.
e00_l8hbe_xe_7.book Page 68 Tuesday, April 27, 2004 10:35 AM