Sanyo DSR-3506P 用户手册
RECORD SET
3
English
71
6
Turn the jog dial to set “DURATION” (10
SEC for example), and then turn the
shuttle dial clockwise.
SEC for example), and then turn the
shuttle dial clockwise.
(Default setting: 1 MIN)
The cursor moves to “ALARM TRIGGER”.
The cursor moves to “ALARM TRIGGER”.
Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
“PRE” appears in the operation display area. When an
alarm occurs, “ALARM” is displayed.
the normal screen.
“PRE” appears in the operation display area. When an
alarm occurs, “ALARM” is displayed.
z
Pre-alarm recording is carried out over the period
before alarm input as set by “DURATION”. In order to
playback pre-alarm recordings, carry out alarm search
(using the [SEARCH] button). (JP.27)
As playback begins at the point of alarm occurrence,
use the shuttle dial to move back into the area of pre-
alarm recording.
before alarm input as set by “DURATION”. In order to
playback pre-alarm recordings, carry out alarm search
(using the [SEARCH] button). (JP.27)
As playback begins at the point of alarm occurrence,
use the shuttle dial to move back into the area of pre-
alarm recording.
z
When normal recording and pre-alarm recording are
performed simultaneously, audio will not be recorded
together with pre-alarm video.
performed simultaneously, audio will not be recorded
together with pre-alarm video.
Use this setting to indicate how alarms are to be detected.
1
Turn the jog dial to select “ALARM
TRIGGER”, and then turn the shuttle
dial clockwise.
TRIGGER”, and then turn the shuttle
dial clockwise.
“ALARM” flashes in the “ALARM TRIGGER” field.
2
Turn the jog dial to select an alarm
detection method, and then turn the
shuttle dial clockwise.
detection method, and then turn the
shuttle dial clockwise.
[Settings] ( indicates the default setting)
[Setting conditions]
z
z
When sensor selection has been made (i.e.,
“SENSOR”, “ALARM AND SENSOR”, or “ALARM OR
SENSOR”) it will be necessary to set the motion
sensors.
“SENSOR”, “ALARM AND SENSOR”, or “ALARM OR
SENSOR”) it will be necessary to set the motion
sensors.
When pre-alarm recording settings have been
completed
completed
EXIT
01-01-04 00:00:00 REC REPEAT EN A PRE 0000
02
Number of alarm
PRE display
Setting the alarm trigger
Setting
Description
ALARM
Alarm recording is performed when an
external alarm is generated (i.e.,
when a switch is attached to the alarm
input terminal on the rear panel, and
the switch is activated).
external alarm is generated (i.e.,
when a switch is attached to the alarm
input terminal on the rear panel, and
the switch is activated).
SENSOR
Alarm recording is performed when a
motion sensor detects movement.
See the section on setting motion
sensors for more details.
motion sensor detects movement.
See the section on setting motion
sensors for more details.
ALARM AND
SENSOR
SENSOR
Alarm recording is performed when
both the external alarm and a motion
sensor are activated simultaneously.
both the external alarm and a motion
sensor are activated simultaneously.
ALARM OR SENSOR
Alarm recording is performed when
either the external alarm or a motion
sensor is activated.
either the external alarm or a motion
sensor is activated.
e00_l8hbe_xe_7.book Page 71 Tuesday, April 27, 2004 10:35 AM