Sanyo DSR-3506P 用户手册

RECORD SET

English

SETTINGS

Press the [EXIT] button.

The setting procedure is ended and the display returns to
the normal screen.
“ALARM” appears in the operation display area.
When an alarm occurs, the number of alarms is displayed.

If a new alarm occurs during alarm recording, the alarm

count is incremented in the same way as if two alarms

had occurred. However, in cases where alarms occur

consecutively on the same channel, alarm retrigger

settings (JP.74) can be used to ensure that these are

counted as one alarm only.

Settings cannot be made for “PRE-ALARM RECORDING”

when “ALARM RECORDING” is set to “OFF”

Turn the jog dial to select “PRE-ALARM
RECORDING”, and then turn the shuttle
dial clockwise.

“OFF” flashes.

Turn the jog dial to change “OFF” to
“ON”, and then turn the shuttle dial
clockwise.

A message appears indicating automatic rate adjustment.
“NO” flashes.

[Settings] ( indicates the default setting)

Turn the jog dial to select “YES” for
warning message, and then turn the
shuttle dial clockwise.

The cursor moves to recording rate and duration.

Turn the shuttle dial clockwise.

“REC RATE” for “PRE-ALARM RECORDING” flashes.

Turn the jog dial to set “REC RATE” (30
FPS, for example), and then turn the
shuttle dial clockwise.

(Default setting: 15.00 FPS)
“DURATION” for “PRE-ALARM RECORDING” flashes.

When alarm recording settings have been completed

To set pre-alarm recording

EXIT

01-01-04 00:00:00 REC REPEAT EN A ALARM 0000

Number of alarm

Alarm display

Setting

Description

OFF

Pre-alarm recording is not carried out.

Pre-alarm recording is carried out.

e00_l8hbe_xe_7.book Page 70 Tuesday, April 27, 2004 10:35 AM