Manualsbrain.com
  1. 份说明书
  2. 个品牌
  3. Sanyo
  4. DSR-3506P
  5. 用户手册

Sanyo DSR-3506P 用户手册

下载
页码 共 112
GENERAL SET
4
80
English
SETTINGS
z
To set a 4-digit password
Turn the shuttle dial clockwise when “-” for the fifth 
character is flashing.
7
Following this, turn the shuttle dial 
clockwise.
The cursor moves to “OFF” (flashing).
8
Turn the jog dial to select “ON”.
z
If you select “OFF” for the “ADMIN” setting, you cannot 
set the “USER” password.
9
Turn the shuttle dial clockwise.
The cursor moves to “USER”.
If you do not want to set a user password, the 
password setting procedure can now be ended.
Turn the jog dial to move the cursor to “REC 
CONTROL” so that authorization for recording and 
playback operations may be set. 
Example: Setting “AB123456”
1
Turn the jog dial to move the cursor to 
“USER”.
2
Turn the shuttle dial clockwise.
The first password entry bar “-” flashes.
Turn the jog dial to display “A”.
3
Turn the jog dial clockwise.
The second password entry bar “-” flashes.
Turn the jog dial to display “B”.
Use the same procedure as for the administrator 
password to set “123456”.
4
Following this, turn the shuttle dial 
clockwise.
The cursor moves to “OFF” (flashing).
5
Turn the jog dial to select “ON”, and 
then turn the shuttle dial clockwise.
The cursor moves to “REC CONTROL”.
1
Turn the jog dial to move cursor to 
“REC CONTROL”.
2
Turn the shuttle dial clockwise.
Turn the jog dial to select either “ADMIN” or “USER”, and 
then turn the shuttle dial clockwise.
This completes the setting procedure.
Setting the user password
USER     A-------         OFF
Setting operation priority for recording and 
playback
e00_l8hbe_xe_7.book  Page 80  Tuesday, April 27, 2004  10:35 AM