Sanyo DSR-3506P 用户手册
GENERAL SET
4
English
81
3
Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
the normal screen.
1
With the normal monitoring screen
displayed, press the [SHUTTLE HOLD]
button for approximately 3 seconds.
displayed, press the [SHUTTLE HOLD]
button for approximately 3 seconds.
The LOCK indicator on the front panel lights up and a
buzzer sounds to indicate activation of the security lock.
buzzer sounds to indicate activation of the security lock.
2
To confirm activation of this function,
press the [MENU] button.
press the [MENU] button.
A password entry screen appears for about 5 seconds.
3
Enter your password while the
password entry screen is displayed.
password entry screen is displayed.
Use the jog dial and the shuttle dial to perform this
procedure.
procedure.
z
Enter the password set for administrators or users
(such as “123456AB”).
Be sure to enter the correct password for the operation
(s) to be carried out. (JP.79)
4
Turn the shuttle dial clockwise.
The security lock is cancelled and the display returns to
the normal screen.
the normal screen.
z
If an administrator password was entered, the security
lock is cancelled and the indicator is turned off.
lock is cancelled and the indicator is turned off.
z
If a user password was entered, the security lock is
partially cancelled and the indicator remains lit.
partially cancelled and the indicator remains lit.
This section describes how to initialize and expand the
hard disk.
When a single hard disk is installed, the hard disk capacity
is displayed for DISK 1; when two hard disks are installed,
the capacity is displayed for “DISK 1” and “DISK 2”.
hard disk.
When a single hard disk is installed, the hard disk capacity
is displayed for DISK 1; when two hard disks are installed,
the capacity is displayed for “DISK 1” and “DISK 2”.
1
Press the [MENU] button and turn the
jog dial to select “3. GENERAL SET”,
and then turn the shuttle dial clockwise.
jog dial to select “3. GENERAL SET”,
and then turn the shuttle dial clockwise.
The <GENERAL SET> screen is displayed.
2
Turn the jog dial to select “4. HDD SET”,
and then turn the shuttle dial clockwise.
and then turn the shuttle dial clockwise.
The <HDD SET> screen is displayed.
The cursor moves to “DISK INITIALIZE”.
The cursor moves to “DISK INITIALIZE”.
Setting the security lock
Canceling the security lock
EXIT
LOCK indicator
[SHUTTLE HOLD] button
SHUTTLE HOLD
Setting and initializing the hard disk
Initializing the hard disk
MENU
e00_l8hbe_xe_7.book Page 81 Tuesday, April 27, 2004 10:35 AM