DISH Network 138410 用户手册

: If you have the receiver connected to a DSL (Digital Subscriber Line) 

phone line, it may cause this test to fail. If so, you will need to install a DSL 
filter between the receiver and the phone jack on the wall. You can get a 
DSL filter from your Internet Service Provider or a local electronics parts 
store.

1. Press the MENU button. 

 

2. Select the 

 option. 

 

3. Select the 

option.

 

 
 

The 

 and 

 screens are helpful to the Customer 

Service Representatives. You may be asked to display these screens when 
you call DISH Network. Even though there are items that can be changed, 
only change them when specifically directed by a Customer Service 
Representative.

1. Press MENU.

2. Select 

.

3. Select 

.

4. Select 

. This screen shows you information to help 

maximize your satellite signal. The bar at the bottom of the screen tells 
you the signal strength. Green is a good signal, while red indicates the 
signal is not acceptable or is from the wrong satellite.

5. Select 

 to display the 

 screen. The 

 screen tells you if you are receiver signals from 

the satellites and which multi-dish switches you have installed, if any. 

6. Select 

 only if directed by the Customer Service Representative. 

7. Select 

.