Intel DX48BT2 用户手册

68 

1.  Begin Windows Setup by booting from the Windows installation CD. 
2.  At the beginning of Windows Setup, press <F6> to install a third-party SCSI or 

RAID driver.  When prompted, insert the diskette that contains the Intel Matrix 
Storage Technology RAID Driver in a USB floppy disk drive.  Refer to 

 for information on supported USB 

floppy disk drives.  Install the Intel

®

 ICH9 SATA RAID Controller driver.  

3.  Finish the Windows installation and install all necessary drivers. 
4.  Install the Intel Matrix Storage Console software via the Intel Express Installer CD 

included with your Desktop Board or after downloading it from the Internet at 

.  The Intel Matrix Storage 

Console software can be used to manage the RAID configuration.  

The Intel Matrix Storage Technology Console software offers the flexibility to upgrade 
from a single Serial ATA drive to RAID without reinstalling the operating system, when 
a second SATA hard drive is added to the system.  

Follow the steps described above in:  "Configuring the BIOS" and "Loading the Intel 
Matrix Storage Technology RAID Drivers and Software." 

Once additional SATA drives have been added to the system, open the Intel Matrix 
Storage Technology Console Software and follow the directions to update to a RAID 
setup.