Epson LS57P2 用户手册

Turn off and unplug your TV, VCR, and cable box.

Connect the VCR as described in “VCR Connection” on page 24.

Connect the cable line coming into the house to the ANT 1 connector on the back of the 
TV.

Remove the jumper cable connected to both the RF Output and ANT 2 connectors on 
the back of the TV. Retain the cable.

Connect one end of a coaxial cable to the RF Output connector on the back of the TV.

Connect the other end of the coaxial cable to the IN connector on the cable box. If your 
coaxial cable has a screw-type connector on the end, secure it by turning the end 
clockwise.

Connect another coaxial cable to the OUT connector on the cable box.

Connect the other end of the coaxial cable to the IN connector on the VCR.

Connect another coaxial cable to the OUT connector on the VCR.

10 Connect the other end of the coaxial cable to the ANT 2 connector on the back of the 

TV.

11 Be sure to turn on use of the TV’s ANT 2 port, as described on page 47.

12 Plug your TV, VCR, and cable box back into an electrical outlet.

Before connecting a cable 
box to the TV, be sure to 
read any instructions that 
came with the cable box.

Be sure to retain the jumper 
cable in case you change 
your TV connections later. 
You’ll need to connect it 
again in certain 
connection schemes to 
provide the channel 
zapping feature.

Cable box

Wall jack

VCR

Audio cable

S-video cable

Coaxial 
cables