Epson LS57P2 用户手册
Setting Up the TV
27
VCR and Satellite Receiver Connection
1
Turn off and unplug your TV, VCR, and satellite receiver.
2
Connect the VCR as described in “VCR Connection” on page 24.
3
Connect the satellite antenna cable to the Satellite In connector on your satellite
receiver.
receiver.
4
Connect one end of an S-video cable to one of the S-video connectors on your satellite
receiver.
receiver.
(If your satellite receiver uses a DVI connection, connect a DVI cable instead, as shown
on page 21. If it uses a component video connection, connect it as shown on page 22.)
on page 21. If it uses a component video connection, connect it as shown on page 22.)
5
Connect the other end of the S-video cable to one of the S-video connectors on your
VCR.
VCR.
6
Connect one end of a standard, red/white audio cable to the R and L Audio Line Out
connectors on your satellite receiver.
connectors on your satellite receiver.
7
Connect the other end of the audio cable to the R and L Audio Line In connectors on
your VCR.
your VCR.
Note
Before connecting a
satellite receiver to the TV,
be sure to read any
instructions that came with
the receiver.
satellite receiver to the TV,
be sure to read any
instructions that came with
the receiver.
Note
If your satellite receiver
doesn’t have an S-video
connector, you can
connect a video cable
(yellow) to the Video
connectors instead of the
S-video cable using these
instructions.
doesn’t have an S-video
connector, you can
connect a video cable
(yellow) to the Video
connectors instead of the
S-video cable using these
instructions.
It’s best to connect your
satellite receiver to the
S-Video connectors on the
back of the TV to free up
the S-Video connector on
the front to connect a
camcorder.
satellite receiver to the
S-Video connectors on the
back of the TV to free up
the S-Video connector on
the front to connect a
camcorder.