Raritan Computer 255-30-6000-00 用户手册
Chapter 2: Installation
33
f. Type the name you want to assign to the subsidiary Paragon
switch on this channel port (the highlight should turn green
when you start typing). Press Enter when finished and then press
S to save the new name. All other paths (channel ports) by which
that subsidiary Paragon switch is attached to the Paragon switch
above it will be given the same name automatically.
when you start typing). Press Enter when finished and then press
S to save the new name. All other paths (channel ports) by which
that subsidiary Paragon switch is attached to the Paragon switch
above it will be given the same name automatically.
g. Press F2 to reopen the Selection Menu; make sure that the
channel port(s) of the second‐tier Paragon switch are properly
established. All paths to that Paragon switch should be displayed
in purple.
established. All paths to that Paragon switch should be displayed
in purple.
h. Press F5 to return to the Administration Menu. Select Channel
Configuration again. Select a channel port that has been
configured for the subsidiary Paragon switch you just set up.
Press G to activate a dedicated Channel Configuration menu for
the subsidiary Paragon switch.
configured for the subsidiary Paragon switch you just set up.
Press G to activate a dedicated Channel Configuration menu for
the subsidiary Paragon switch.
i. Edit the names of all servers attached to this subsidiary Paragon
switch. Each highlight should turn green as you start typing.
Press Enter when finished with each name. Press S to save all of
the new names.
Press Enter when finished with each name. Press S to save all of
the new names.
j.
Press F2 to access the dedicated Selection Menu for that
subsidiary Paragon switch. Verify that new names appear in
green in the Selection Menu.
subsidiary Paragon switch. Verify that new names appear in
green in the Selection Menu.
k. If you are configuring a second‐tier subsidiary Paragon switch,
and there are any third‐tier Paragon switches attached to it,
repeat steps C through J for a third‐tier path configuration. Press
S to save the configuration. Press F2 to activate the Selection
menu and verify that the third‐tier Paragon switch is properly
configured: select a channel port for the second‐tier path and
press Enter, then a channel port for the third‐tier path and press
Enter, and then a channel port for a server attached to the
third‐tier Paragon switch and press Enter. If you can properly
access and operate the chosen server, the third‐tier Paragon
switch is properly installed.
repeat steps C through J for a third‐tier path configuration. Press
S to save the configuration. Press F2 to activate the Selection
menu and verify that the third‐tier Paragon switch is properly
configured: select a channel port for the second‐tier path and
press Enter, then a channel port for the third‐tier path and press
Enter, and then a channel port for a server attached to the
third‐tier Paragon switch and press Enter. If you can properly
access and operate the chosen server, the third‐tier Paragon
switch is properly installed.
Note: Repeat step K for all remaining third‐tier Paragon switches (if
any) attached to this second‐tier Paragon switch.
any) attached to this second‐tier Paragon switch.