Ciprico 4105 Series 用户手册
MV 4105_Ciprico Inc.
8-7
MediaVault 4105 User Manual Maintenance
NOTE: Rebuild (reconstruction) times vary, depending on the
system’s work load. When the system is idle the rebuild time is
approximately 16.5 Gbytes/minute (that is, it takes approximately
60 minutes to rebuild 1TByte).
system’s work load. When the system is idle the rebuild time is
approximately 16.5 Gbytes/minute (that is, it takes approximately
60 minutes to rebuild 1TByte).
NOTE: The service LED stays illuminated and the RAID 3 LED blinks.
After the rebuild process is finished, the drive LEDs and service LED
go off.
After the rebuild process is finished, the drive LEDs and service LED
go off.
9.
As a precaution, after the rebuild (reconstruction) process is finished,
power-down the array.
power-down the array.
10.
Power-up the array.
11.
Power-up the host computer.