Motorola RMU2040 用户手册

English

Before programming the features, make 

sure your radio is set to the channel you
wish to program. You can do so before 
entering 

Advanced Configuration  Mode 

or at any time during the 

Advanced 

Configuration Mode by pressing SB2 
until reaching the desired channel.

To read or modify Frequencies, Codes, 

Auto-Scan or Active Channels, set the radio 

to 'Advanced Configuration Mode' by 

pressing and holding the PTT and SB1 

buttons simultaneously for 3 to 5 seconds 

while powering up the radio and until you 

hear a voice prompt saying "Programming 

Mode" and "Channel #".

'Idle' Programming Mode is the stage of 

the Programming Mode in which the 
radio is waiting for the user to start the 
radio programming cycle

.

Once you are in the 'Idle' Programming Mode, 
you will be able to hear the Frequencies, 
Codes, Auto-Scan and active channels 
settings by short pressing the PTT button to
move along the different programmable 
features.

R

M Series radios have 89 frequencies for UHF.

Once  in  ‘Idle’  Programming  Mode,  the  first 
value available to change is Channel number, 
you can change the channel by pressing SB2 
button until you reach desired Channel, voice 
announcement  will  indicate  channel  selected. 
Using  SB1  and  SB2  you  can  change  values. 
The  value  selected  is  announced  by  voice 
prompt.