Motorola RMU2040 用户手册

English

Reading CTCSS/DPL Values
If you continue short pressing the PTT button 

the radio will move forward to programming 

CTCSS/PL Codes. 

After hearing the current value for CTCSS/PL 

Code you can scroll to a new code value 

using the SB1 or SB2 button. 

RM Series have up to 122 codes available 

(refer to “Frequencies and Codes Charts” 

Section).

Reading Auto-Scan Values 
After hearing the CTCSS/DPL codes, short 

press the PTT button and the radio will move 

forward to programming Auto-Scan.

Auto-Scan only has two values: 

- Enabled

- Disabled 

Note: While in Auto-Scan Mode, if you short press 

PTT button, the radio will move forward to 

programming the "Active Channels" feature, so 

you can modify the amount of channels 

available for your unit using the SB1 or SB2 

button.

If you are satisfied with the setting, you 

can either:

•

short press PTT to continue

programming,

•

long press PTT to save and return to

'Idle' Programming Mode, or

•

long press the PTT button twice to exit

'Idle' Programming Mode and return to

the normal radio operation.

•

If you do not wish to save the value you just 

programmed, turn the radio OFF.

•

If you ‘roll-over’ to the beginning of ‘Idle’ 

Programming Mode you will hear "Channel #" 

and the LED Indicator will start blinking green 

again. All values that were changed will be 
automatically saved.