Motorola CP200 用户手册

Your radio is equipped with the Scan feature, 
which allows you to monitor multiple channels 
for voice activity. The radio will stop on a 
channel when it detects activity on it.

Your radio automatically switches to a channel 
within the scan list when it detects activity.

The LED indicator blinks green during a scan 
operation and stops blinking when the radio 
switches to a channel.

There are two types of Scan available in your 
radio:

• System  Scan

• Auto Scan

The Talkback feature allows you to respond to 
a transmission while scanning. If a 
transmission is detected on a channel while 
scanning, the radio will stop on that channel for 
a default period of time after activity has 
ceased. This is referred to as “hangtime”. 
During this hangtime you may respond by 
pressing the PTT button.

Note: The LED scan indicator stops blinking 

while the radio is in hangtime. If the 
PTT button is not pressed during the 
preprogrammed hangtime, the radio 
returns to scanning channels.

Press the preprogrammed Scan button (see 
page 14).

Press the preprogrammed Scan button.

Auto Scan automatically starts scanning once 
a channel with Auto Scan enabled is selected.

Select the channel that your dealer has 
preprogrammed for Auto Scan.

Select a channel that has not been 
preprogrammed for Auto Scan.

05_Scan.fm  Page 31  Monday, November 17, 2003  1:57 PM