Motorola CLS1110 CLS1410 用户手册

Factory Default Settings
Your radio is programmed at the factory to the following settings: 

To restore the factory settings, turn the radio on while holding Push to Talk and 

S

for 3 seconds.

2

2

Not available

8

5

6

1

®

Off (0)

Not available

Off (0)

2 (medium sensitivity)

Entering Programming Mode
Press and hold Push to Talk and 

T

 for 3 seconds while turning the radio on. The 

radio beeps and displays k, the channel number flashes, and the frequency 
(indicated by l) and code (indicated by y) display alternately.

Note:  If you press and release the Push to Talk button when programming 
CSL1410 models, you will return to the front of the Programming Mode.
Selecting a Channel (CLS1410 Only)
1. In programming mode, press 

S

 until the channel number flashes 

and the frequency and code display alternately (this is the first 
setting after you enter programming mode).

2. Press [ or ] to select the channel.
3.  Press and hold Push to Talk to exit programming mode, or 

press

S

 to continue programming.

Programming the Frequency
1. In programming mode, press 

S

 until l displays and the 

frequency number flashes.

2. Press [ or ] to select the frequency.
3.  Press and hold Push to Talk to exit programming mode, or 

press

S

 to continue programming.

Note:  See page 39 for information on frequencies for communicating with other 
business radios. If you are matching your _ Series radio to an existing Spirit GT 
radio, see page 45.