Motorola CLS1110 CLS1410 用户手册

The interference eliminator code helps minimize interference by providing code 
combinations that filter out static, noise, and unwanted messages.

1. In programming mode, press 

S

 until y displays and the code 

number flashes.

2. Press [ or ] to select the code (see page 42).
3.  Press and hold Push to Talk to exit programming mode, or press 

S

 to continue programming.

If you need fewer channels, you can reduce the number of available channels.

1. In programming mode, press 

S

 until = displays and the channel 

number flashes.

2. Press [ or ] to select the number of channels you want 

available.

3.  Press and hold Push to Talk to exit programming mode, or press 

S

 to continue programming.

Note:  The radio retains settings for channels made unavailable.

Your radio can transmit call tones to other radios in your group so you can alert them 
that you are about to talk. Your radio is programmed at the factory with call tones 
turned off (set to 0), but you can change this setting to choose a distinctive call tone.

The VibraCall

 feature is an additional call tone option that makes the CLS1410 radio 

vibrate briefly when it receives if you have not transmitted or received in the last 
30 seconds. Select call tone 4 to turn VibraCall

 on. i displays on the radio when 

VibraCall

 is on.

1. In programming mode, press 

S

 until E displays.

2. Press [ or ] to hear and select the call tone. Select call tone 4 

for VibraCall

 (CLS1410 only).

3.  Press and hold Push to Talk to exit programming mode, or press 

S

 to continue programming.

To transmit your call tone, press B on the side of the radio.