Philips 00 用户手册
English
3
Connection and Installation
3.1 Connections
3.1.1
Connect the receiver to your TV and VCR
Incorporate the receiver in your existing installation as shown below / decoder receiver.
1
Plug your aerial lead plug into the "AERIAL IN" socket of your digital receiver.
2
Connect the "RF OUT" socket of your digital receiver to the "Aerial input" socket of your VCR by
means of the RF coaxial lead supplied with your digital receiver.
means of the RF coaxial lead supplied with your digital receiver.
3
Connect the "RF OUT" socket of your VCR to the "Aerial input" socket of your TV set by means
of a RF coaxial lead.
of a RF coaxial lead.
4
Connect the "TV" SCART socket of your digital receiver to the RGB capable SCART socket of
your TV set by means of the SCART lead supplied with your digital receiver.
your TV set by means of the SCART lead supplied with your digital receiver.
5
Connect the "VCR" SCART socket of your digital receiver to the "EXT1" SCART socket of your
VCR (so called OUT) by means of a SCART lead.
VCR (so called OUT) by means of a SCART lead.
6
Plug all your equipment, excluding your digital receiver, into the mains.
7
Go to chapter 3.2 to proceed with the channel scan of your digital receiver.
Notes:
1- This connection also applies if your VCR has one SCART socket.
2- With this connection set up you can:
1- This connection also applies if your VCR has one SCART socket.
2- With this connection set up you can:
- Watch digital TV while you record analogue TV.
- Watch analogue TV while you record digital TV.
- Record the digital TV channel you are watching.
- Watch Play Back from your VCR.
- Watch analogue TV while you record digital TV.
- Record the digital TV channel you are watching.
- Watch Play Back from your VCR.
TV set
Video recorder
Terrestrial
receiver
receiver
12 C O N N E C T I O N A N D I N S TA L L AT I O N
6610_A5_GB.qxd 01/09/2004 12:58 Page 12