用户手册目录IMPORTANT NOTICE2Safety Precaution2Maintenances Precaution2Contents3Overview of CT10 Barcode Scanner5Features of the Scanner5Appearance5Introduction of Key Function6Specifications6Correct Aiming7Incorrect Aiming7QUICK START8Enter the Setting Mode9Exit the Setting Mode with Save9Exit the Setting Mode without Save10Restore Factory Defaults10Check Software Version10Save Custom Settings11Chapter 1 Features and Basic Setups121.1 Battery131.1.1 Mounting the battery (charging)131.1.2 How to operate CT10 Barcode Scanner131.1.3 Auto Power Off141.2 Transmit Buffer151.2.1 Inventory Mode161.3 LED Indicator171.4 Beeper181.4.1 Beeper Volume191.5 Scan Modes201.5.1 Manual Mode201.5.2 Continuous Mode211.5.3 Auto Power Off Mode221.5.4 Auto-induction Mode241.6 Symbologies Supported251.7 USB Wired Data Transmission25Chapter 2 How to Connect with BT262.1. Select Output Interface272.1.1 BT SPP Mode272.1.2 BT HID Mode272.2 Setting up a BT connection282.3 Connect to PC via BT292.4 Connect to PDA via BT352.4.1 One-click Android Connection392.4.2 One-click iOS Connection422.4.3 Connect via BT Input Method45Chapter 3 SYMBOLOGY SETTINGS543.1 CODABAR553.2 CODE 25 –INDUSTRIAL25563.3 CODE 25 –INTERLEAVED 25573.4 CODE 25 –MATRIX 25583.5 CODE 25-STANDARD 25593.6 CODE 39603.6.1 Enable/Disable Code 39603.6.2 START/STOP Transmission603.6.3 Checksum Verification613.6.4 STANDARD/FULL ASCII CODE 39623.7 CODE 93623.7 CODE 93633.8 Code 128643.9 EAN-8653.9.1 Enable/Disable EAN-8653.9.2 Convert to EAN-13653.9.3 Checksum Transmission663.10 EAN-13673.10.1 Enable/Disable EAN-13673.10.2 Convert to ISBN673.10.3 Checksum Transmission683.11 UPC-A693.11.1 UPC-A Output ‘0’693.11.2 UPC-A Checksum Transmission693.12 UPC-E703.12.1 Enable/Disable UPC-E703.12.2 UPC-E Checksum Transmission703.13 MSI713.14 CODE 1172Chapter 4 DEFINING OUTPUT FORMAT734.1 CODE ID744.2 Suffix Code of Barcode Settings75APPENDIX I762.4.3 Connect via BT Input Method45文件大小: 1.1 MB页数: 77Language: English打开用户手册