Epson 800N Benutzerhandbuch

6. Follow the instructions on the screen, inserting the 

requested diskette or CD-ROM if necessary. 

When setup is complete, the Network Services tab or 
Network Settings dialog box reappears.

7. In Windows NT 4.x, make sure 

Microsoft TCP/IP 

Printing

 appears in the Network Services list, select it, and 

click 

Properties

. The Microsoft TCP/IP Properties dialog 

box appears.

In Windows NT 3.5x, make sure 

Microsoft TCP/IP 

Printing

 appears in the Installed Network Software list 

box, then click 

OK

. The TCP/IP Components box appears.

8. Set the IP address and the subnet mask of the Windows 

NT server or workstation. If you want to use the gateway 
(router), set the IP address of the nearest gateway as the 
default gateway.

9. In Windows NT 4.x, click 

Yes

 to restart the computer.

In Windows NT 3.5x, click 

Restart Now 

when the 

Network Settings dialog box appears.

For more information, see your Windows NT documentation. 
Then follow the instructions below to configure the Ethernet 
card in your printer.

If you’re using Windows NT, follow these steps to configure 
your printer with EPSON Net!:

1. Double-click the 

EPSON Net! (NT)

 icon to start EPSON 

Net! for Windows.

2. Select the correct serial number for the Ethernet card in 

your printer (check the printed status sheet to verify this 
number) and click 

Open

. The IP Config dialog box opens 

and shows the current IP address.

QuikSet2.fm  Page 18  Wednesday, October 15, 1997  3:49 PM