Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Chassis and Stacking
165
M6100, M5300, and M7100 Series Managed Switches
If you enabled this feature, power redundancy mode is applied.
Configure the System Power
To configure the system power:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Click System > Chassis > Advanced > Chassis Power Configuration.
8.
To configure system power, in the System Power field, specify the power reserved for the
system, excluding PoE power.
This provides a way to reserve power for blades. The remaining power can be used by a
PoE sub system. System Power must be less than or equal to 2550W. Use 0 to reset
System Power to defaults.
PoE sub system. System Power must be less than or equal to 2550W. Use 0 to reset
System Power to defaults.
9.
Click the Apply button.
The system power is applied.