Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Chassis and Stacking
166
M6100, M5300, and M7100 Series Managed Switches
Configure the Power Auto-Rebalance
To configure the power auto-rebalance:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select System > Chassis > Advanced > Chassis Power Configuration.
8.
In the Power Auto-rebalance field, specify whether power auto-rebalance mode is Enabled
or Disabled.
9.
Click the Apply button.
Power is applied in auto-rebalance mode. When enabled, the system automatically shuts
down low priority ports to power up higher priority ports, even if they were spread across
different blades on the chassis.
down low priority ports to power up higher priority ports, even if they were spread across
different blades on the chassis.