Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Security > Control > IPv6 Source Guard > Interface Configuration.

Use Interface to select the interface.

Use IPv6SG Mode to enable or disable validation of sender IPv6 address on this interface.

If IPv6SG is enabled, packets are not forwarded if the sender IPv6 address is not in the 
DHCP snooping binding database. The factory default is Disable.

Use IPv6SG Port Security to enable or disable the IPv6SG port security on the selected 

interface. 

IP Address

Displays valid IP address for the binding entry.

Filter Type

Filter type used on the interface. One is source IP address filter type, 
and the other is source IP address and MAC address filter type.